Amplifier Type : Configurable professional power amplifier

Number of Channels : 8 channels (outputs configurable; 2–8)

Total Output Power : 2000 W (max rated power; 250 W × 8 channels @4 Ω)

Application : Houses of worship; Retail stores; Atriums and shopping malls; Restaurants; Auxiliary zones; Convention centers; Hospitality venues

Output Power (per channel) : PowerRating table - in 2 Ω / 4 Ω / 8 Ω / 70 V / 100 V: Mono Mode: 250 W / 250 W / 250 W / See footnote 3 / See footnote 3 V-Bridge Mode: 250 W(2 Ω)² / 500 W (4 Ω) / 500 W (8 Ω) / 400 W (70 V) / 500 W (100 V) I-Share Mode: 500 W (2 Ω) / 250 W(4 Ω)² / 150 W(8 Ω)² / Not available / Not available Quad Mode: 1000 W(2 Ω)² / 1000 W (4 Ω) / 500 W(8 Ω)² / 800 W (70 V) / 1000 W (100 V) Note: (2) Configuration not recommended / optimal. (3) Limited use: tap at 2× the desired power for 70V speakers; tap at 4× the desired power for 100V speakers.

Frequency Response : 20 Hz - 20 kHz (1 W and ±0.5 dB)

THD+N : THD for power rating: <0.1 % (2 Ω, 4 Ω, 8 Ω), 1 % (70 V / 100 V). Analog input THD: <0.4 % (1 W, 20 Hz–20 kHz)

SNR (Signal-to-Noise Ratio) : >99 dB (1 dB below rated power, A-weighted)

Number and Type of Inputs : Analog: 8 balanced line level inputs (3-pin Phoenix Contact, green; sensitivity options 0, +4, +12, +24 dBu). Digital: Digital input with optional digital card (card dependent); digital sensitivity options 0, -12, -20, -24 dBFS.

70V/100V Output : Supported. Example power values given in table for V-Bridge and Quad modes; Note: For limited use, 70V speakers should be tapped at 2× the desired power, and 100V speakers at 4× the desired power (footnote 3).

Digital Audio (AES/Dante) : Dante support with optional PowerMatch Dante network card (PowerMatch Dante network card 359844-0020). Digital audio dependent on digital input card.

Internal DSP : Integrated DSP; A/D and D/A 48 kHz / 24-bit; total latency < 0.95 ms; input-output routing 8 × 8 matrix.

EQ : Input EQ: 5 band PEQ (±20 dB), notch, shelving, high pass, low pass. Speaker EQ: 9 band PEQ (±20 dB), shelving, high pass, low pass, 2-band RoomMatch array EQ. Band-pass filters: Butterworth, Bessel, or Linkwitz-Riley, max. 48 dB/octave.

Limiter : Output limiter: Peak and RMS voltage. Also overload protection: high temperature, DC, high frequency, short circuit, voltage limiter, current limiter, inrush current, and mains circuit breaker protection.

Remote Control (RS-232/Ethernet) : Ethernet: Configuration, network control, and monitoring via ControlSpace Designer over RJ-45 (100 Mb). PC interface: USB type B. Fault notification: NC/NO relay contact output (1 A, 30 VDC).

Rack Size : 88 mm × 483 mm × 525 mm (3.5" × 19" × 20.7") - 2 rack spaces. Mounting depth: 533 mm (21")

Cooling : Microprocessor-controlled, variable-speed fans; front-to-back airflow.

Power Supply : Mains voltage 100-240 V (50/60 Hz). Recommended circuit: 15 A (120 V) or 10 A (230 V). Minimum AC line voltage 80 V. Maximum inrush current 15.4 A (230 VAC, 50 Hz). Maximum RMS current draw 8 A. Output stage topology: Class-D. Includes PeakBank power supply and fast-tracking PFC.

Weight : Net weight 12.98 kg; Shipping weight 15.4 kg.

Certification : CE compliant; cUL listed (UL60065 7th ed.) and CAN/CSA C22.2 No. 60065-03; CB approved (IEC60065 7th ed.); FCC Part 15B Class A; Canadian ICES-003 Class A; EN55103-1, EN55103-2, CISPR13.