Model : Biamp Voltera D 2400.8

Features : Speaker controller with integrated amplifier; 100% software configurable (Tesira, VenueTune); ALAMOS speaker profile library; 5-year warranty; Compliant with the US Trade Agreement Act (TAA); Biamp Workplace Ready

Total output (all channels driven) : 2400 W

Number of Class D amplifier channels : 8

Max. output voltage : 145 Vpk

Power per channel (all channels driven) : Hi-Z (70 / 100 V): 300 W · 16 ohm: 300 W · 8 ohm: 300 W · 4 ohm: 300 W · 2.7 ohm: 300 W

Max. channel power (with power sharing) : 100 V: 1200 W · 70 V: 1200 W · 16 ohm: 650 W · 8 ohm: 1200 W · 4 ohm: 1200 W · 2.7 ohm: 1200 W

Network ports : 2 × 1000Base-T ports

Supported network media formats : Dante, AES67, and AVB

Network modes : Converged, split, or redundant

PoE+ support : Yes; no reboot on main power loss if Port 1 PoE+ and UPS are connected

Network latency : AVB: 2 ms · Dante: 1 / 2 ms

Sampling rates : 96 and 48 kHz

Remote interface : Tesira, VenueTune

Third-party interface : TTP

Processing latency (analog input → output) : 2.65 ms (including look-ahead latency in zero-overshoot peak limiters)

Default gain (analog input → output) : 29 dB

Inputs : Input redundancy and failover support to analog sources

Group control : Multi-layer group control for raised cosine EQ, gain, delay (≤2 s), polarity, and mute

FIR : 2048 tap FIR optimization

Output processing : 2048 tap FIR, 24 biquads, Dynamic EQ, peak and thermal limiters (with side chain)

Boot up time with PoE+ : <1 s

THD+N (1000 Hz, 1 dB below clip) : <0.05%

Frequency response : +/-0.5 dB (20 - 20000 Hz, 8 ohms, unweighted)

Channel separation (1 kHz) : >70 dB

Dynamic range : 117 dB

Control and monitoring IO : Mute all channels (input), Health (output), Sleep mode status (output), Sleep mode (input)

Programmable GPIO : 4 logic/voltage control pins (defined by Tesira)

Analog input connectors : 3-pin terminal block, 0.15" (3.81 mm) pitch

Output connectors : 2-pin terminal block, 41 Arms rating; up to 8 mm2 (8.2 AWG) cable

Power connector : Detachable 3-pin IEC C14 inlet for C13 cables

Front panel : Tamper proof design; Bi-directional locate function; System, device, and channel status indicators

Cooling : Variable speed fans, front to back airflow

Operating temperature : 32-104F (0-40C)

Relative humidity : 0-95% non-condensing

Altitude : 0 - 2000 m (0-6562 ft)

Nominal voltage : 100-240 VAC, 50/60 Hz

HxWxD (rack rail → rear panel) : 1.7 x 17.5 x 16.9 inches (44 x 444 x 430 mm)

Weight : 18.3 lbs (8.3 kg)

Included accessories : Rear support kit for 19" 1 RU mount