Biamp Voltera D 1200.8 Amplified Loudspeaker Controller
Special quotes and installation support for project and bulk purchases. Get a project quote
Biamp Voltera D 1200.8
The Voltera D series integrates amplification with a powerful loudspeaker controller, offering an integrated DSP, high channel density, and power sharing in a compact 1 RU solution.
Easy Configuration
100% software-based configuration and commissioning support with Tesira or VenueTune software.
Wide Dynamic Range
Stable performance with a wide dynamic range and comprehensive limiter scheme.
Continuity with PoE+
The processor can be powered via PoE; if port 1 is connected to a PoE+ UPS, the device will not reboot when the main power supply is interrupted.
Integrated DSP
Advanced speaker management on every channel, ALAMOS speaker profile support, and multi-layered group control.
Technical Specifications
Model : Biamp Voltera D 1200.8
Features : Integrated DSP with speaker management; high power and channel density; power sharing; AVB, Dante, and AES67 support; ALAMOS speaker profile library; 100% Tesira or VenueTune configuration.
Number of Class D amplifier channels : 8
Total output (all channels driven) : 1200 W
Maximum output voltage : 145 Vpk
Maximum output current : 24 Apk
Power per channel (all channels driven) - Hi-Z (70 / 100 V) : 150 W
Power per channel (all channels driven) - 16 ohms : 150 W
Power per channel (all channels driven) - 8 ohms : 150 W
Power per channel (all channels driven) - 4 ohms : 150 W
Power per channel (all channels driven) - 2.7 ohms : 150 W
Maximum power per channel (with power sharing) - 100 V : 600 W
Maximum power per channel (with power sharing) - 70 V : 600 W
Maximum power per channel (with power sharing) - 16 ohms : 600 W
Maximum power per channel (with power sharing) - 8 ohms : 600 W
Maximum power per channel (with power sharing) - 4 ohms : 600 W
Maximum power per channel (with power sharing) - 2.7 ohms : 600 W
Network ports : 2x 1000Base-T ports
Media formats over network : Dante, AES67, and AVB
Network modes : Unified, separated, or redundant
PoE+ support : If port 1 is connected to a PoE+ switch with UPS, the Voltera D will not reboot when the main power supply is interrupted
Network latency : AVB: 2 ms, Dante: 1 / 2 ms
Sampling rates : 96 and 48 kHz
Remote interface : Tesira, VenueTune
Third-party interface : TTP
Processing latency (analog input to output) : 2.65 ms (including look-ahead latency within zero overshoot peak limiters)
Default gain (analog input to output) : 29 dB
Per input : Input redundancy and support for switching to analog sources
Group control : Layered group control: raised cosine EQ, gain, delay (≤2 s), polarity, and mute
FIR / EQ : 2048 tap FIR optimization, 24 biquads
Output processing : Extensive processing, dynamic EQ, peak and thermal limits with sidechains
Startup time (with PoE+) : <1 s
THD+N (1000 Hz, 1 dB below max. output) : <0.05%
Frequency response : +/-0.5 dB (20 - 20000 Hz, 8 ohms, unweighted)
Channel separation (1 kHz) : >70 dB
Dynamic range : 117 dB
Control and monitoring IO : Mute all channels (input), Health (output), Sleep mode status (output), Sleep mode (input)
Programmable GPIO : 4 logic/voltage control pins, defined with Tesira software
Analog input connectors : 3-pin terminal block connector, 0.15" (3.81 mm) pitch
Output connectors : 2-pin terminal block connector, rated for 41 Arms; accepts 8 mm2 (8.2 AWG) cables
Detachable main power connector : 3-pin IEC C14 inlet, for C13 cables
Front panel interface : Tamper-proof design; bidirectional locate function; system status indicator; device status indicators (status, activity, error); channel status indicators (mute, signal, limit, thermal)
Cooling : Variable speed fans, front-to-back airflow
Operating temperature : 32-104F (0-40C)
Relative humidity : 0-95% non-condensing
Altitude : 0 - 2000 m (0-6562 ft)
Nominal Voltage : 100-240 VAC, 50/60 Hz
Dimensions (HxWxD, rack rail to rear panel) : 1.7 x 17.5 x 16.9 inches (44 x 444 x 430 mm)
Weight : 18.1 lbs (8.2 kg)
Included accessories : 19" 1 RU rack mount rear support kit
Delivery & Return Terms
Delivery: Within North Cyprus in 72 hours · Free delivery on orders of 10,000 TL and above, 300 TL below that · Store Pickup free of charge
Returns: 14-day right of withdrawal · Unused and in original packaging
Warranty: All products carry a 12-month warranty backed by FAV Technology.
Manufacturer warranty: 5 years — subject to manufacturer terms